Baader 2" Deluxe Clamp (with 2" Filter holder)

Baader 2" deluxe eyepiece clamp with bronze clamping ring and two locking screws. Eyepiece Holder for SC's (with 2" SC female thread) with 2" Filter holder.

This accessory consists of three parts, [T-2 #17], [T-2 #17A]* and [T-2 #17B]*.
*Not sold separately.

The Baader part [T-2 #17B] must thread onto the 2" telescope-thread and may hold any of optional Baaders 2" filters. The second part [T-2 #17A] is a 2" deluxe eyepiece clamp with the bronze clamping ring and two locking screws.

When both parts are threaded onto any SC-telescope, the combo looks like Baader's normal 2" Deluxe-clamp, but the performance is much better than any normal 2" SC-clamp on the market, since the customer may seal the optical tube from dust and moisture and may cut off the unwanted parts of the light for their application, like using an optional UV/IR-Filter to cut the infrared - or use an optional nebula filter UHC-S or O III - or any other filter!

The important difference is that the Baader's 2" filters are optically polished to not destroy or impair the wavefront of light and to retain perfect sharpness even under high magnification.

• 2" clamp with bronze clamping ring and two locking screws
• For Celestron C8 and some 8" Meade SC´s
• With 2" Filter holder

Technical Data

• Optical length : 53 mm
• Clamping System : Screw clamps
• Screw Type : 2x M4 clamping screws
• Inner Diameter / Clear Aperture : 47 mm
• Outer Diameter : 67 mm
• Telescope Side : 2" UNC

Scope of Delivery

• [T-2 #17A+B] Baader 2" Deluxe Clamp (with 2" Filter holder)
  Filter & Telescope are NOT included!