Primalucelab Eagle power supply

If you want to use the EAGLE power supply (which can supply power to all other connected devices) and use it from a fixed drive, such as an observatory, you can connect it to the AC adapter power supply. This 12V, 8 14V power supply (compatible with 100-240V) comes with a 2.5 meter extension cable and EU (Schuko), Uk and USA plugs. When the power supply cable is used with the included extension, it is 5 meters long.

The 14A version has a slightly higher voltage (12.8V instead of the usual 12V) because when you power from the EAGLE, many accessories with high power consumption will see a small voltage drop that is always a little over 12V this way.

For example, if you want to use a cooled CCD camera (that usually requires a lot of Amps) we advice you to select the 12A version. If you use a uncooled DSLR camera, you can use the 5A version. Let's see some example, considering maximum power consumption for every element connected and powered to the EAGLE:

Example setup 1 - low power consumption system

- EAGLE: maximum power consumption 1A (average power consumption: 0.6A)

- Uncooled SLR camera: power consumption 0 (powered from internal battery of the camera)

- SkyWatcher AZ-EQ6 SynScan mount: maximum power consumption 2A (average power consumption: 1A)

- Guide camera: QHY5L-II mono: power consumption 0 (powered from EAGLE USB port)

Total maximum power consumption: 3A. For this system we suggest you the 5A power adapter.

Example setup 2 - high power consumption system

- EAGLE: maximum power consumption 1A (average power consumption: 0.6A)

- Cooled CCD camera: maximum power consumption 4A (average power consumption: 3A)

- SkyWatcher AZ-EQ6 SynScan mount: maximum power consumption 2A (average power consumption: 1A)

- Guide camera: QHY5L-II mono: power consumption 0 (powered from EAGLE USB port)

Total maximum power consumption: 7A. For this system we suggest you the 12A power adapter.